View FAQ

- Servers - Windows -


After installing Hyper-V Integration Services on the Blue Screen ...
 (posted by Steven A on 2013-12-03 00:11:00)

After installing Hyper-V Integration Services on the next reboot the VM displays BSOD 0x0000007B


Solution:

    After the required reboot, the VM shows a Bluescreen 0x0000007B INACCESSIBLE_BOOT_DEVICE


    1. Boot the VM into LastKnownGood. Press F8 during boot.


    2.  Open the Registry and drill down to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Wdf01000


    3. There is a Group Value that should have the Value WdfLoadGroup. In my cases it was wrongly set to base. Change this to WdfLoadGroup


    4. Then remove the Integration Components from Control Panel/Software.


    5.Reboot the VM (now without ICs)


    6. Install the ICs once again


     

Comments:

© 2024 TkFast, Inc.  |  main  |  public  |  FAQs