After installing Hyper-V Integration Services on the next reboot the VM displays BSOD 0x0000007B

After the required reboot, the VM shows a Bluescreen 0x0000007B INACCESSIBLE_BOOT_DEVICE




1. Boot the VM into LastKnownGood. Press F8 during boot.




2.  Open the Registry and drill down to HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Wdf01000




3. There is a Group Value that should have the Value WdfLoadGroup. In my cases it was wrongly set to base. Change this to WdfLoadGroup




4. Then remove the Integration Components from Control Panel/Software.




5.Reboot the VM (now without ICs)




6. Install the ICs once again