View FAQ
| - Software - |
(posted by
on 2024-06-17 09:25:46) |
| Crestron Home Beta Firmware ... |
|
| Crestron Home Beta Firmware | |
Solution:
Processor Instructions: 1. (You only need to do this once for the life of the processor. Proceed to step 2 if you have done this step in the past) At the CP4-R/MC4-R console: enableprogramcmd updatereleaselevel crestronhomebeta sea07647wolf 2. Then check for updates by going to: Crestron Home app Installer Settings->Check for Updates ******************************************************************************************************** iOS Instructions: Have TestFlight already downloaded on the IOS device. From that device browser, Follow this link to beta test the iOS app: https://testflight.apple.com/join/qvEvUmop This will prompt you to download the test flight application and allow you to download the beta version of the IOS application. Android Mobile Instructions: On the Google Play Store description of the application, enable beta mode. ******************************************************************************************************** Touch Panel Instructions Make sure the panels are at their most current release FW. Apps are available via app manifests – set by the following console command: Remember to copy the ENTIRE line. X60: internalmanifesturl GEN_APPS https://siproducts.blob.core.windows.net/crestron-home-beta/beta_manifest.json X70: internalmanifesturl GEN_APPS https://siproducts.blob.core.windows.net/crestron-home-beta/beta_x70_manifest.json TST-1080 internalmanifesturl GEN_APPS https://siproducts.blob.core.windows.net/crestron-home-dev/beta_tst1080_manifest.json Once you run the command in the console. Go to the Web UI of the panels. In the upper right corner >Action> Upgrade app Apps will auto-update at 2AM. Pinned Post Kevin Peacock (Crestron Electronics, Inc. - Domestic Tech Support - ROCKLEIGH - US) April 26, 2024 at 9:17 PM Putting Processor and Panels back on Release Versions If you would like to take your processor off of beta these are the following steps. It is recommened to not go to a new version of server FW prior to going back to release as there is a chance the config my not be compatible. Processor 1. Connect to text console via toolbox 2. Send the command “enableprogramcmd” 3. Send the command “updatereleaselevel release” 4. Go to the setup app and you will see an update Panels 70 Series Panels 1. Connect to device in text console 2. Send command “internalmanifesturl GEN_APPS https://crestrondevicefiles.blob.core.windows.net/70-series/production/applications/manifest_x70_apps.json” 3. Send command “setdigitaljoin 29604 1”. This will have the app update immediately 60 Series Panels 1. Connect to device in text console 2. Send command “internalmanifesturl GEN_APPS https://firmwareupload.blob.core.windows.net/appdownload/manifest.json” 3. Send command “setdigitaljoin 29604 1”. This will have the app update immediately |
|
 |
Broadcast Corporate Education Event Centers Healthcare Home Theater Hospitality House of Worship Museums Residential Retail |
 |
Computer Automation Web Phone |
|
Accolades Testimonials Automation Portfolio Web Portfolio Design Portfolio |
|
Company Info Staff Corporate Partnership News & Events |
|
TkFast, Inc. 437 South Hydraulic Street Wichita, KS 67211-1911 Phone: 316-260-2500 Toll Free: 877-TKFAST-1 Fax: 316-260-4242 info@tkfast.com 
|
©2024 TkFast, Inc. All Rights Reserved. | Privacy Statement | Site Map